Rotex Type Gyratory Screen Separator 75mm~90mm Amplitude CE Certificate
Introduction
Gyratory screen is designed to provide precise and accurate sieving, it adopts eccentric mechanism which drives the material on the screen surface do uniform gyratory reciprocating swing motion,the materials are spread and stratified on the full screen surface, then the gyratory reciprocating motion gradually changes to an elliptical motion at the centre which is good for material sieving,a straight-line motion at the discharge end,the material movement track becomes short and then materials flow out of the outlet.Gyratory screener is widely used in chemical,fertilizer,metallurgical,ceramsite,refractory materials,grain, food, abrasives, mining and other industries in the sizing process of material accurate screening.
Advantages and Features
1. Large capacity than normal vibrating screen;
2. The accurate is six stage separation, and screening efficiency is highly from 95% to 99%
3. Using silicone rubber ball, ultrasonic device such as efficient clean network system.
4. Without blocking mesh net,Sealed dust and safe operation;
5. The acceleration is 4.5 times lower than the vibrating screen,so the screening parts life increase and reduce maintenance;
6. With low noise which is less then 75 db. Optimize the weight balance, foundation dynamic load is low.
Application
1. Mainly used for screening, filtering, grading and removing impurity for all kinds of powder, particle, and liquid.
2. Mainly suitable materials: chemical, medical powder and particle, coating, pigment, cosmetic, grease, resin, ceramic sauce, slurry, quicklime, fireproofing powder, metallurgy powder, starch,flour, rice flour, carbon powder, graphite powder, manganese powder, sewage, waste oil, dung, etc.
Technical Parameters
| Model | Screen Surface | Layer No. | Feeding Size | Amplitude (mm) | Frequency (r/min) | Power (kW) |
| width | length |
| PXZS1224 | 1200mm | 2400mm | 1-4 | <50mm | 75-90 | 1450 | 5.5 |
| PXZS1230 | 1200mm | 3000mm | 1-4 | <50mm | 75-90 | 1450 | 5.5 |
| PXZS1236 | 1200mm | 3600mm | 1-4 | <50mm | 75-90 | 1450 | 5.5 |
| PXZS1524 | 1500mm | 2400mm | 1-4 | <50mm | 75-90 | 1450 | 5.5 |
| PXZS1530 | 1500mm | 3000mm | 1-4 | <50mm | 75-90 | 1450 | 5.5 |
| PXZS1536 | 1500mm | 3600mm | 1-4 | <50mm | 75-90 | 1450 | 5.5 |
| PXZS1830 | 1800mm | 3000mm | 1-4 | <75mm | 75-90 | 750 | 7.5 |
| PXZS1836 | 1800mm | 3600mm | 1-4 | <75mm | 75-90 | 750 | 7.5 |
| PXZS1840 | 1800mm | 4000mm | 1-4 | <75mm | 75-90 | 750 | 7.5 |
| PXZS2036 | 2000mm | 3600mm | 1-4 | <75mm | 75-90 | 750 | 7.5 |
| PXZS2040 | 2000mm | 4000mm | 1-4 | <75mm | 75-90 | 750 | 11 |
| PXZS2050 | 2000mm | 5000mm | 1-4 | <75mm | 75-90 | 750 | 11 |
Note: The parameter above is just for reference,it can be customized by different requirment.
Selection Conditions
| ♦ Material to be processed: | ♦ Screen layer/deck/sieve number: |
| ♦ Bulk density: t/m3 | ♦ Mesh size of every screen layer/deck/sieve: mm |
| ♦ Material Temperature: ºC | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
| ♦ Water Content: % | ♦ Downstream equipment (what kind of equipment is used to discharge the material): |
| ♦ Material is corrosive or not: (Yes or No) | ♦ Drive: (Domestic or International brand or designated brand?) |
| ♦ Material is sticky or not: (Yes or No) | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
| ♦ Granule size of material: mm | ♦ Working environment: (indoor or outdoor) |
| ♦ Max. granule size: mm | ♦ Working environment temperature: °C |
| ♦ Particle distribution percentage: | ♦ Working power supply: 3 Phase V Hz |
| ♦ Handling capacity: t/h | ♦ Quantity: sets |
Product Tags:
|
|
Rotex Type Gyratory Screen Separator 75mm~90mm Amplitude CE Certificate Images
|
